Tecumseh Centrifuges

TEC-1655-FVS
CENTRIFUGE APPLICATIONS

• Horizontal Directional Drilling andf Hydrovac Slurry

• Drilling Fluids Processing & Polishing

• Dewatering

• Barite Recovery

• Meat Rendering & Nutrient Control

• Waste Fluids Treatment, Recovery, and Disposal

• Produced Water Processing

• Pulp and Paper

• Sump Cleaning

• Heavy Oil Drilling and Plant Processes

• Distillers (Brewing Industry)

• Municipal Waste Water Treatment

• Bio Fuel

• Industrial & Chemical

• Vegetable Oil

• Fish Oil & Fish Meat

• Dairy & Beverage

• Marine

PROCESSING SPECIFICATIONS

MAXIMUM HYDRAULIC CAPACITY
265 US-GPM/min. (1.0 M³/min.)
(rated with water)

MAXIMUM RATE OF SOLID LOADING

14,000 lbs/hour
(7 tons/hour)

SOUND LEVEL

90dBa @ 1m

SAVE SOME GREEN
SAVE MONEY, TIME AND REDUCE ENVIRONMENTAL IMPACT

Reduce water consumption by up to 70%.

Reduce environmental impact due to fewer trucks required to move multiple pieces of equipment.

Reduce the risk of equipment and operator harm by eliminating the need for cranes to move and setup the equipment.

Reduce waste by providing a means to recondition and recycle water from drilling mud and waste slurry streams.

Provide a safe working environment for operators by eliminating ladders and utilizing stairs for upper level access.

Less tank cleaning.

Less land spreading required.

HOME > CENTRIFUGE MODELS

TEC-1655 FULL VARIABLE SPEED CENTRIFUGE

A Full Variable Speed model, which provides operators with the ability to adjust operating parameters including the differential speed, bowl speed, and feed rates while the centrifuge is in operation.

This centrifuge has the added benefit of a "direct drive" Conveyor drive assembly. With this new conveyor drive design, we have increased the efficiency of the conveyor drive motor significantly as well as eliminated any maintenance issues associated with utilizing belts and sheaves.

With real-time full variable speed adjustment capability of all operating parameters, operators have the ability to fine tune the centrifuge for optimum performance over a wide range of different applications, and in situations where process characteristics are ever changing. Full variable speed capability is achieved by applying three variable frequency drives to each drive motor of the centrifuge respectively (main drive, conveyor drive, and feed rate). This allows operators to adjust the differential rpm, feed rate and "G" of the centrifuge while in fill operation.

A Pro Logic Control (PLC) and touch screen can also be added to the control system providing a level of control logic to help achieve your process automation and preset parameter needs.

BUILD NOTES

-4 Solid Discharge Ports
-4 Liquid Discharge Ports

OPERATING SPEEDS FOR OILFIELD APPLICATIONS

Low Speed Operations for High Gravity solids removal (i.e. barite)
BOWL SPEED: 1,050 - 2,000 RPM
ACCELERATION: 300 - 908 G's
DIFFERENTIAL: 30 - 60 RPM

High Speed Operations for Low Gravity solids removal (i.e. fine drilled solids)
BOWL SPEED: 2,100 - 3,150 RPM
ACCELERATION: 1,000 - 2,254 G's
DIFFERENTIAL: 10 - 30 RPM

Maximum Safe Operating Speed
BOWL SPEED: 3,150 RPM
ACCELERATION: @ 3,150 RPM: 2,254 G's
DIFFERENTIAL: 10 - 60 RPM

OTHER SPECIFICATIONS

BOWL DIMENSIONS: 16in x 55in (406.5mm x 1398mm)
BEACH ANGLE: 10-degree beach angle
POOL PORT (POND) ADJUSTMENT: 1 - 13 units of adjustment
MAIN DRIVE MOTOR: 60hp
CONVEYOR DRIVE MOTOR: 20hp
WEIGHT (EMPTY): 9,000lbs (4,085kgs)
FLIGHTING PITCH: 110mm (4.25 in.)
MAXIMUM SAFE OPERATING CONVEYOR TORQUE: 100,000 in/lbs (11.3 kNn) of torque
GEARBOX RATIO: 56:1 ratio
POWER REQUIRED: 1 - 100 amp plug @ 480 VAC

'G' FORCE CALCULATION

*The following is a formula used to calculate 'G' force:
G = Bowl Diameter (in) X Bowl RPM2 X .0000142

TEC-1655-FVS CENTRIFUGE

TEC-1865-FVS CENTRIFUGE

TEC-2075-FVS CENTRIFUGE